You are here:
Tech Tips >
Direction of Rotation
For optimal performance follow these instructions:
DIRECTION OF ROTATION
|- Ready to install. Final precision grinding and balance are done at factory.
- Clean friction surfaces with brake cleaner.
- Torque lug nuts to O.E. specifications. Never over torque.
- Follow break-in procedures if new pads are installed.
Note: The above direction of rotation is to show the surface slotting and/or
drilling direction of straight vane rotors.
If the rotors have curved (directional) vanes,
the cooling vanes were made in opposite direction to these slottings for optimum
performance as illustrated below: