You are here:
Tech Tips >
Two Piece Rotor Torque Instructions
|The hardware design requires precise torque to ensure proper floating
These rotors have been assembled and checked manually with a torque wrench prior
to shipment. DO NOT attempt to further tighten hardware. Tightening the
hardware beyond specifications can be as dangerous as under-tightening and can
lead to service failure.
The hardware is self-locking and does not require thread lock (such as blue Loc-Tite). If you have to retighten any loose or dissembled fasteners you should use thread
locker and follow the torque sequence diagram.
The recommended torque for the hardware is 108-120 in-lb.