Home > Rotor & Brake Kit > MERCEDES > Select By Models > GT S/R >

RB 2pc Rotor Kit (390x36mm) for Mercedes S63/65, SL55/63, E63 S 2017+, GT S, C63S/BS & Other AMG Front
RB 2pc Rotor Kit (390x36mm) for Mercedes S63/65, SL55/63, E63 S 2017+, GT S, C63S/BS & Other AMG Front
This product photo is for reference only.
 
MSRP (pair): $1,795.67
Sale Price (pair): $1,616.10
You save $179.57!
Size: 390x36mm
Rotor Wt (lbs.): See below

Product Code: 2237
Qty:

Description Application List
 
This package includes:
  • 1 Set - front lightweight two-piece rotors assembled ready for installation
  • 1 Set - front RB series quiet, low dust street performance brake pads
Weight Comparison (each)
OE 1-pc36 lbs.
OE 2-pc31 lbs.
RB 2-pc28 lbs.
RB Wt Savings:
Over OE 1-pc: 8 lbs
Over OE 2-pc: 3 lbs

These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed, and an excellent upgrade for both street and track. They can deliver consistent brake torque under extreme heat, session after session. When it comes to replacement - operating cost over the time will be lower than one-piece rotor.

RB rotors are made of harder iron than OE rotors. Our rotors are most compatible with semi-metallic brake pads. We do not recommend the use of ceramic brake pads, which may cause vibration.

Rotor Material: Racing Formula Alloyed Gray Iron & Heat treated
Machining: Open Slot
Surface: EDP Coating w/cross cut grinding on friction surface

Replacement Ring: D601-05-381

NOTE: Retaining and jack screw holes might have been eliminated to prevent the screws from stripping and breaking, causing tremendous effort to remove and replace the rotors. Our two-piece rotor hats are made of aluminum which is easier for installation and removal. See detail view here.

Click here to learn how RB two-piece rotors are built differently than the competition.

Material:

  1. Alloyed iron formula adds strength and heat resistance. Heat treating further improves rotor performance for a more uniform and stabilized microstructure.

Design:

  1. The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler. (Illustration #1)


  2. The center-mount flanges for hat mounting to the rotor ring have several benefits. (Illustration #2)
    • It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
    • The stress load transferred from the ring to the hat is balanced.
    • Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
    • Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
    • Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.
  3. Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.

Related Links:
Two-Piece Feature Comparison Chart


Share your knowledge of this product with other customers... Be the first to write a review