Home > Rotor & Brake Kit > FORD > Focus (2011+) > See All Items (List View) >

RB Track Duty Brake kit (350/350) for Ford Focus ST/RS 2011+ (P/N 2566 & 2565) Fits 18" wheels
RacingBrake 14" Track Duty Big Brake Kit for Ford Focus ST/RS 2011+ (2016+) (P/N 2564 & 2565)
This product photo is for reference only.
MSRP: $3,010.00
Sale Price: $2,709.00
You save $301.00!

Availability: Usually Ships in 2 to 3 Weeks
Product Code: FOR-IRP-07

This kit includes:
  • 2 ea. Front RB 4-Piston calipers (6061-T6 forged aluminum alloy)
  • 2 ea. Front RB 2-pc rotors (ventilated)
  • 1 ea. Front set of RB street performance brake pads
  • 2 ea. Front aluminum alloy caliper adapters
  • 2 ea. Rear RB slotted 2-pc rotors (non ventilated)
  • 2 ea. Rear OE caliper bracket adapters
  • 1 ea. Car set of stainless steel braided brake lines
Wheel Fitment Template:

This combo kit is specifically designed to fit 19" wheels (front and rear), however due to variety of aftermarket wheels, we recommend checking your wheel clearance to confirm fitment.
Click here to download the wheel fitment template for this kit.

Features and Benefits:
  1. Easy installation, only rear caliper brackets need to be modified (more details below).
  2. Stainless steel pistons reduce heat transfer to brake fluid.
  3. Built-in dust seals, no boots to burn out like OE's external dust boots.
  4. Pad springs in all four corners provides tight fit of brake pads - no slippage, no rattling noise like OE's loose fit (no springs).
  5. Pads are secured by two M6 hex socket bolts to positive lock the pads in place and replace the pads easily with Allen wrench allows for easy brake pads changes without needing to remove calipers.
  6. RB caliper are engineered in the pistons size and position to improve braking efficiency and taper wear.
  7. Calipers are precisely machined in every corner and cut.
Rotor comparisons:

Front Rear
Size (mm) Wt (lbs) Size (mm) Wt (lbs)
ST (12-14) 320x25 21 270.7x10.9 9
ST (15+) 334x25 23 270.7x10.9 9
RS (16+) 350x25 23 302x11 12
RB 2-PC 350x32 19.8 350x12 11.7

Front RB Rotor Weight:

Caliper comparison:

OE caliper (loaded w/pads & spring)

RB caliper (loaded w/pads & spring)

For further details see the following threads:
Two piece rotor for Ford Focus RS
Brake upgrade option for Focus RS offered by RacingBrake

Installation Note:
Rear caliper bracket needs to be trimmed (~2mm) on higher side to clear 350mm rotor.

Click here for more details.

Links to related reviews and discussions:
World's First: RacingBrake 2 Piece Brake Rotors...
Received RacingBrake rotors today! p.s I will not go back to the dealer ever...
RacingBrake makes me happy
Black Series Brakes on C63

Caliper Design:
Click here to view the comparison chart and learn how RB calipers are built different than others, and demystify whether mono-block or two halves construction is stiffer.

- Caliper Body: Made of forged aluminum alloy designed and built for the toughest brake jobs with extended service life before any rebuild is required.

- Low Profile: Together with RB Center-Mount design two-piece rotors, you hardly even need to require a spacer to install the kit.

- Pistons: Stainless steel instead of aluminum commonly used by other caliper mfgrs which can substantially reduce the heat transfer (approx 1/10 of aluminum) from the pad to brake fluid. Pistons are vented to further reduce the heat contact area and improve air circulation thereby reducing more heat transfer.

- Dust Seal: Our dust seal is of built-in type (instead of external boot type) uniquely designed to shield the dust and foreign material from contamination and will not rip - as commonly seen on boot type dust seals. Piston

- Hardware: Brake pad pins and banjo connections were re-designed for easier brake line connection and brake pad replacement.

- Hardware: Most hardware is made of stainless steel for durable performance and appearance.

- Never Get Lost Bleeder Cap: Newly designed with a retaining loop so you will never have to find it again and/replace the lost ones. (made of durable EPDM) Piston

- Use standard FMSI brake pads : A very common P/N is used with these calipers.

- Made in USA: Calipers are designed, fully assembled and hydro-tested in our Fullerton, CA facility, with full after sales support/service.

Rotor Design:

Our unique and patented rotor designs make our discs cooler and last longer.

  1. Convergent vane design

    The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler. (Illustration #1)

  2. Center-mount design

    The center-mount flanges for hat mounting to the rotor ring have several benefits. (Illustration #2)
    • It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
    • The stress load transferred from the ring to the hat is balanced.
    • Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
    • Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
    • Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.
  3. True floating design

    Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.

Related Links:

Feature Comparison Two-piece Rotor
Two-piece Disc Surface Finish

Share your knowledge of this product with other customers... Be the first to write a review