Home > Rotor & Brake Kit > FERRARI > Rotor & Brake kit >

RB Rotor Kit (CCB to Iron Conversion) for Ferrari F458, 599, California (P/N 2454 & 2455)
RB Iron Two-piece Rotor Conversion Kit for Ferrari 458 (P/N 2454 & 2455)
This product photo is for reference only.
 
Our Price: $3,360.00
Sale Price: $2,997.00
You save $363.00!

Price with Selected Options: $2,997.00
Size: See below
Rotor Wt (lbs.): See below

Availability: Usually Ships in 3 to 5 Days
Product Code: FER-IRK-07

RB-Brake Pad

XT910 - (Street (PD1395-391 & PD1001/PD1165-391) [Add $458.00]
XR70 - Track (PD1395-3R7 & PD1001/PD1165-3R7) [Add $667.00]

Qty:
Description
 
This kit includes:
  • 2 ea. Front RB Iron Rotors
  • 2 ea. Rear RB Iron Rotors
Benefits:
  • Brake systems retain stock calipers (Brembo) and pads.
  • Pre-assembled for an easy bolt on installation.
These iron rotors were engineered and built by RacingBrake based on the expertise and experience we have accumulated over the past decades in brake design and casting technology. Not only they can deliver more consistent braking performance, strong and durable, but also can save you a lot money in replacement cost. And with iron rotors you no longer have to baby sit those expensive and fragile CCM rotors. RB iron rotors can inspire your confidence on track with a peace of mind in controlling your car as well as your budget (save brake pads replacement & fluid change etc.).
Rotor weight comparison:


FRONT REAR
Size (mm) Wt (lbs) Size (mm) Wt (lbs)
OE CCB 398x36 13.6
360x32 10.2
RB Iron 395x36 27.5 360x32 19.3
*OE is 398mm in OD but actual swiping diameter is only 394mm, so RB rotors are made to better fit OE caliper setup and eliminate the rusty lips commonly seen in Brembo designs.

Replacement Components:
Front Rotor Ring: D602-04-381
Rear Rotor Ring: D501-10-381

Links to forum discussions & reviews:
Steel Rotors for CCB?
Aftermarket Rotors - How durable they are.
RacingBrake makes me happy

RB rotors are made of harder iron than OE rotors. Our rotors are most compatible with semi-metallic brake pads. We do not recommend the use of ceramic brake pads, which may cause vibration.

Rotor Material: Racing Formula Alloyed Gray Iron & Heat treated

These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed. They can deliver consistent brake torque under extreme heat, session after session. When it comes to replacement - operating cost over the time will be lower than one-piece rotor. Our unique and patented rotor designs make our discs cooler and last longer:

  1. Convergent vane design

    The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler. (Illustration #1)

  2. Center-mount design

    The center-mount flanges for hat mounting to the rotor ring have several benefits. (Illustration #2)
    • It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
    • The stress load transferred from the ring to the hat is balanced.
    • Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
    • Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
    • Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.
  3. True floating design

    Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.
  4. Iron sleeve insert
RB aluminum rotors hats are constructed of aluminum with an iron sleeve insert. This allows for significant weight savings while still preserving the use of the stock emergency brake. This design is only available through RB.

Related Links:
Feature Comparison Two-piece Rotor
Two-piece Disc Surface Finish









Share your knowledge of this product with other customers... Be the first to write a review