Home > Rotor & Brake Kit > MERCEDES > Select By Models > GT S/R >

RB Iron Rotor Kit for Mercedes S63/65, C63S, GT S, SL63/65 AMG 2014+ (P/N 2237 & 2357)
RB Iron Rotor Kit for Mercedes S63/65, C63S, GT S, SL63/65 AMG 2014+ (P/N 2237 & 2357)
 
Our Price: $2,650.00
Sale Price: $2,533.00
You save $117.00!

Availability: Usually Ships in 1 to 2 Weeks
Product Code: MB-IRK-12
Qty:

Description
 
Save money and weight by purchasing this complete package that includes:
Rotor Weight Comparisons:

FRONT REAR
Size (mm) Wt (lbs) Size (mm) Wt (lbs)
OE
390x36 31 360x26 23.5
RB 390x36
390x34 (alt)
28
24.5
360x26 15.1

Replacement Components:
Brake Pad:
Front: PD1291
Rear: PD1681 (To be available soon)

Rotor Ring:
Front: D601-05-381
Rear: D406-02-381

RB rotors are made of harder iron than OE rotors. Our rotors are most compatible with semi-metallic brake pads. We do not recommend the use of ceramic brake pads, which may cause vibration.

Rotor Material: Racing Formula Alloyed Gray Iron & Heat treated

These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed. They can deliver consistent brake torque under extreme heat, session after session. When it comes to replacement - operating cost over the time will be lower than one-piece rotor. Our unique and patented rotor designs make our discs cooler and last longer:

  1. Convergent vane design

    The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler. (Illustration #1)


  2. Center-mount design
    The center-mount flanges for hat mounting to the rotor ring have several benefits. (Illustration #2)
    • It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
    • The stress load transferred from the ring to the hat is balanced.
    • Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
    • Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
    • Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.
  3. True floating design
    Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.
Related Links:
Feature Comparison Two-piece Rotor
Two-piece Disc Surface Finish


Share your knowledge of this product with other customers... Be the first to write a review