Home > Rotor & Brake Kit > TESLA > Model S & X >

RB 2pc Rotor Kit (355/365) for Tesla Model S & X (P/N 2434 & 2435)
RB Two-piece Rotor Kit for Tesla Model S (P/N 2434 & 2435)
Our Price: $2,598.00
Sale Price: $2,208.30
You save $389.70!
Size: See below
Rotor Wt (lbs.): See below

Availability: Usually Ships in 1 to 2 Weeks
Product Code: TES-IRK-01

Features and Benefits:
  1. Plug and play installation - Made to fit OE calipers without any modifications.
  2. Reduced rotating mass and unsprung weight - Total weight savings of about 38 lbs resulting in better handling and acceleration.
  3. Affordable replacement components - Replacement discs can be purchased separately for about half the cost of new assembled two piece rotors.
Package includes:
Weight Comparisons:

Size (mm) Wt (lbs) Size (mm) Wt (lbs)
OE 1-PC Rotor 355x32 29.5 365x28 28*
RB 2-PC Rotor 355x32 22.6 365x28 17.3
*Based on earlier models with rear drum brake although it's not used and an auxiliary hand brake was added instead. Customer reported current rear rotor is now 20.8 lbs
Replacement Components:
Front Rotor Ring: D403-06-381
Rear Rotor Ring: D406-01-381

These two-piece rotors were engineered to be the best stock replacement two-piece rotor on the performance market. This rotor is direct bolt-on, easy to install, no additional hardware needed. They can deliver consistent brake torque under extreme heat, session after session. When it comes to replacement - operating cost over the time will be lower than one-piece rotor. Our unique and patented rotor designs make our discs cooler and last longer:

  1. Convergent vane design

    The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler. (Illustration #1)
  2. Center-mount design

    The center-mount flanges for hat mounting to the rotor ring have several benefits. (Illustration #2)
    • It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
    • The stress load transferred from the ring to the hat is balanced.
    • Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
    • Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
    • Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.
  3. True floating design

    Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.
Related Links:
Feature Comparison Two-piece Rotor
Two-piece Disc Surface Finish

Share your knowledge of this product with other customers... Be the first to write a review