Home > Rotor & Brake Kit > MITSUBISHI > Rotor & Brake kit >

RB 2pc Rotor Kit for EVO 8-9 Front
Two-piece rotor - EVO 8-9 FRONT
This product photo is for reference only.
 
MSRP (pair): $987.94
Sale Price (pair): $889.15
You save $98.79!

Price with Selected Options: $889.15
Note: 2018
Size: 320x32mm (12.6" x 1.3")
Rotor Wt (lbs.): 19

Product Code: 2018

Add Brake Pads - 10% Discount

Brake_Pads
MITSUBISHI:
Add our most popular street pads (ET500 Compound)for a 10% discount off the brake pads.
PD1001-35 [Add $109.71]

Qty:
Description Application List
 

Rotor Material: Racing Formula Alloyed Gray Iron & Heat treated
Surface: EDP Coating w/cross cut grinding on friction surface

NOTE: Retaining and jack screw holes might have been eliminated to prevent the screws from stripping and breaking, causing tremendous effort to remove and replace the rotors. Our two-piece rotor hats are made of aluminum which is easier for installation and removal. See detail view here.

Click here to learn how RB two-piece rotors are built differently than the competition.

Weight Comparison
OE 1pc
22.5 lbs.
RB 2pc
17.0 lbs.
Weight Savings: 3.5 lbs.

Replacement Components

Rotor Ring: D300-02-381

Fasteners: FK1

Material:

  1. Alloyed iron formula adds strength and heat resistance. Heat treating further improves rotor performance for a more uniform and stabilized microstructure.

Design:

  1. The cooling vanes are of a convergent nozzle design, which increases airflow and turbulence and makes discs cooler. (Illustration #1)

  2. The center-mount flanges for hat mounting to the rotor ring have several benefits. (Illustration #2)
    • It allows the ring to be used on either side of the vehicle simply by mounting the hat on either side of the ring (unidirectional).
    • The stress load transferred from the ring to the hat is balanced.
    • Air inlets are widely open to both inboard and outboard sides of the rotor. More air suctions and even temperature on both sides of the disc surface.
    • Heat transfer from the disc surfaces to the hat is even and minimized by increasing the flange length and the airflow around the flanges.
    • Mounting flanges are on both friction surfaces ultimately provides excellent heat balance.
  3. Exclusive full floating design with 10.9 grade alloyed hardware. Hardware is DACRO coated and crimp locking. DACRO is highly corrosion resistant and provides a film for easier movement between the hat and rotor ring as disc expands and contracts and the crimp design provides positive engagement without rattling or torque loss at temperature.

Related Links:
Two-Piece Feature Comparison Chart


Accessories
Boots and Seals Kit for Mitsubishi (03-16) EVO 8/9/10 Rear Boots and Seals Kit for 2003+ Mitsubishi EVO 8/9 & 10, Subaru STi 08-17 (1 Front Caliper) RB 2pc Rotor Kit for EVO 8-9 Rear Piston Kit (Stainless Steel) for Mitsubishi (03-16) EVO 8/9/10 Rear Caliper
Sale Price (Per Caliper): $28.00

Add
Sale Price (Per Caliper): $56.00

Add
Sale Price (pair): $867.16

Add
Sale Price (per caliper): $60.00

Add
Boots and Seal Kit - Rear 2 Piston Brembo Calipers Caliper rebuild parts - 4-piston Brembo caliper Two-piece rotor - EVO 8-9 REAR Piston Kit (Stainless Steel) for Mitsubishi (03-16) EVO 8/9/10 Rear Caliper
Piston Kit (Stainless Steel) for 2003+ Mitsubishi EVO 8/9 & 10, Subaru STi 08-17 Front 4 Piston Caliper
Sale Price (per caliper): $120.00

Add
Brembo EVO caliper pistons

Share your knowledge of this product with other customers... Be the first to write a review